Extron electronic DVS 150 User Manual

Specifications — dvs 150 digital video scaler

Advertising
background image

1-2

DVS 150 • Specifications

Specifications — DVS 150 Digital Video Scaler

Video input

Number/signal type ................... 1 RGBHV, RGBS, RGsB pass-through,

1 component video (Y, R-Y, B-Y),
1 S-video,
1 composite video

Connectors .................................... 3 BNC female .......................... component video

1 4-pin mini-DIN female ....... S-video
1 BNC female ........................... composite video
1 15-pin HD female ............... RGB pass-through

Minimum/maximum levels ...... Analog ....... 0.0V to 1.0V p-p with no offset
Impedance .................................... 75 ohms
Vertical frequency ....................... 50 Hz to 60 Hz (does not apply to pass-through)

Video output

Number/signal type ................... 1 scaled RGBHV, RGBS, RGsB

1 scaled RGBHV or pass-through RGBHV/RGBS/RGsB

Connectors .................................... 6 BNC female

1 15-pin HD female

Minimum/maximum levels ...... 0.0V to 0.7V p-p
Impedance .................................... 75 ohms
Vertical frequency ....................... 56 Hz, 60 Hz, or 75 Hz
Scaled VGA resolution ............... 640x480, 800x600, 832x624, 848x480, 852x480, 1024x768, 1280x768, 1280x1024,

1360x765, HDTV 480p, 720p, and 1080p

Sync

Input type ..................................... RGBHV, RGBS, RGsB
Output type .................................. RGBHV, RGBS, RGsB
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Output level .................................. TTL ............. 5.0V p-p
Output impedance ....................... 75 ohms
Polarity .......................................... Positive or negative (switch-selectable)

Control/remote — decoder/scaler

Serial control port ........................ RS-232, 9-pin female D connector
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Pin configurations ....................... 1 = input 1 select

2 = TX
3 = RX
4 = input 2 select
5 = GND
6 = input 3 select
7 = input 4 select

Contact closure ............................ 9-pin female D connector (same as RS-232 connector)
Contact closure pin configuration . See pins 1, 4, 6, and 7 above.
Program control ........................... Extron’s control program for Windows®

Extron’s Simple Instruction Set™ – SIS™

General

Power ............................................. 100VAC to 240VAC, 50/60 Hz, 30 watts, internal, auto-switchable
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing

Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing

Rack mount ................................... Yes, with optional rack shelf, part #60-190-01
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.6" H x 8.75" W x 9.4" D (1U high, 1/2 rack width)

4.1 cm H x 22.2 cm W x 23.9 cm D

Advertising