EAW CAM60 - Manual (Page 2)

Part No. SW0139 Rev. B 05/07
PERFORMANCE
Input 1-4 (balanced / unbalanced)
Sensitivity Impedance
Mic 0.5 mV / 1 mV 600 ohm
Line 50 mV / 200 mV 47k ohm
Aux In (unbalanced)
Aux 100 mV 20k ohm
Tuner 180 mV 30k ohm
Tape 320 mV 50k ohm
CD 570 mV 80k ohm
Tel/Paging (balanced / unbalanced)
Variable 600 ohm
Main In (unbalanced)
1 V 10k ohm
Output
Maximum Load Impedance
Preamp 1 V (nominal) 600 ohm
Monitor 1 W 8 ohm
Low Z 60 W 4 ohm
High Z 25 V / 70 V / 100 V 4 ohm / 33 ohm / 67
ohm
Operating Range (+/-3 dB)
Mic In to Amp Out 50 Hz to 15 kHz
Noise
>60 dB (below maximum output)
Distortion (THD, 60 W @1 kHz)
<0.5%
CAM 60
5 INPUT x 1 OUTPUT 60 W MIXER-AMPLIFIER
PHYSICAL
Front Controls
Type Range
Input 1-4 Level 0 to 10
Aux Level 0 to 10
Equalization Lo +/-10 dB @ 100 Hz
Hi +/-10 dB @ 10 kHz
Volume Level 0 to 10
Power AC mains On / Off
Rear Controls
Input 1-4 Select Line/Mic/Phantom 24V
Power Switch 24 V DC On / Off
Aux Select CD/Tuner/Tape/Aux
Tel & Mon Vol Level
Mains Power
Rating Fuse
AC (50/60 Hz) 115 V / 230 V (+/-5%) 2.5 A fuse
DC 24 V 15 A fuse
Power Input 345 W
Environmental
Maximum Ambient 131° F / 55° C
Humidity Non-precipitating
Dimensions (inches / mm)
H x W x D 3.9 x 17.1 x 13.2 100 x 435 x 335
Weight (approximate net lb / kg)
25.6 11.6
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 2 of 2