Epoq Steamer - Manual (Page 17)

32 33
Some mobile phones will also support the following additional dedicated
Bluetooth features:
Voice Dial
If this is implemented in the connected mobile phone, the function will be
activated by pressing the Streamer phone button shortly.
Last Number Redial
If this is implemented in the connected mobile phone, the function will be
activated by a long press on the Streamer phone button.
These two features cannot be activated during another phone call or when
listening to music with the Streamer.
Listening Tip
When a phone call is started, the microphones in your hearing instru-
ments are always switched on, allowing you to hear the acoustical sound
from the surrounding environment.
To focus on the phone conversation, especially in noise situations, you
can switch off the hearing instrument microphones by pressing the
Streamer audio button for two seconds.
6.4 Listening to Audio sources
The Streamer can connect your hearing instruments to many
diff erent audio sources and allows you to use your hearing
instruments to function as wireless headphones.
An audio source can be connected to your hearing instruments through the
Streamer in two ways:
• by wired input to the micro jack
• by a wireless Bluetooth connection
From the audio button on the Streamer, you can start and stop audio
streaming to the hearing instruments.
Before streaming audio, you must place the Streamer inside the Body Area
Network. It is recommended to use the neck strap.
Audio streaming can be activated in the hearing instruments independent
of which program you have selected in your hearing instruments.