Emerson Radio CKD1100 - Manual (Page 20)

19
Setting The Alarms / Selecting The Wake-up Mode
After you have adjusted the wake-up times on one or both alarms you must press
the respective ALARM 1 and/or ALARM 2 buttons one, two or three times, to
activate the alarms and select the wake-up mode.
The color of the AL1 and AL2 indicators will change according to the wake-up
mode that you select - Buzzer, Radio, or CD.
• Press the ALARM 1 or ALARM 2 button once.
The AL indicator is Red. This indicates the Wake To Buzzer mode is selected
and the alarm is ‘On’.
• Press the ALARM 1 or ALARM 2 button twice.
The AL indicator is Green. This indicates the Wake To Radio mode is selected
and the alarm is ‘On’.
• Press the ALARM 1 or ALARM 2 button three times.
The AL indicator is Yellow. This indicates the Wake To CD mode is selected
and the alarm is ‘On’.
• Press the ALARM 1 or ALARM 2 button a fourth time and the AL1 or AL2
indicators disappear. This indicates that the alarms are canceled.
CKD1100_052107.p65 21/5/2007, 10:44 19