Emerson Radio Barbie BAR598 - Manual (Page 10)

9
OPERATION
Make sure that your digital frame is correctly connected using the AC
adapter, as shown on the previous page, before turning the frame on.
Press the Power On/Off button to turn the
unit on.
TM TM
1 1
1
Insert an SD/MMC card, up to 2 GB, into
the SD/MMC Card slot 1, making sure to
insert the SD/MMC card correctly as indi-
cated by the arrow. AND/OR
Insert a flash drive into the USB port 2.
The unit will read the SD/MMC card
and/or flash drive contents and show the
pictures in the display.
If both a SD/MMC card and a flash drive
are inserted, this unit will display the con-
tents of the the flash drive first and then
the SD/MMC card.
2 1
2
Press the MENU button to access the
main menu.
TM TM
1 1
3
Picture Management: Use the Up 1
and/or Down 2 button to select Picture
Management and then press the ENTER
button 3 to confirm.
Use the Up 1 and/or Down 2 button to
select the desired picture and then press
the ENTER button 3 to confirm. An “X” will
appear next to the picture name. Press
the ENTER button 3 again to confirm.
Then press the MENU button 4 to exit
the menus.
TM TM
4 1
3
2
4