EdgeStar IP200 User Manual
Page 8
6
The “Water” and
“Ice” indicators
are both flashing.
The ice shovel cannot
move.
Check if the ice is blocking the ice
pusher, otherwise, consult service.
The ice cycle is too long.
Stop the ice maker, and restart it
when the ice blocks melt. Select
the small ice button.
The ice cubes
stick together.
The water temperature in
the inner tank is too low.
Change the water in the inner tank.
The ideal water temperature is
45°
-90°F.
The unit is being run off
the wrong voltage or
frequency.
Plug the unit into a 110/120 Volt,
60 Hertz power source.
The compressor
makes a loud
buzzing noise
The compressor was
damaged in shipping.
Contact the shipper.
The unit does
nothing
Power is not supplied to
the unit.
Plug the unit into a 110/120 Volt,
60 Hertz power source.
The ambient temperature
or the water temperature
is too high.
Please run the ice maker in
temperatures below 90°F and/or
pour colder water into tank.
Refrigerant leakage.
Consult a qualified technician.
The ice making
cycle seems
normal but no ice
is produced.
A pipe in the cooling
system is blocked.
Consult a qualified technician.