Excalibur electronic SMART CITY COUPE 9390 - Manual (Page 2)

3
Battery Installation:
Make sure that the On—Off Power Switches on both the car and the
transmitter are set to “Off” before installing any batteries. We recom-
mend using alkaline batteries for best performance.
Car Battery Installation:
Open the battery compartment, located on the bottom of the car, by
sliding the latch with your thumb in the direction of the arrow. (See
diagram below.)
Lift the battery cover off and then install the 3 AA batteries (not
included), making sure to match the polarity (+ and -) with the dia-
gram inside the battery compartment. (See diagram below.) Then
replace the battery cover.
Remote Control Transmitter
Battery Installation:
Find the battery compartment on the back of the transmitter. Use a
small Phillips screwdriver to remove the screw. Remove the battery
cover by sliding the latch with your thumb in the direction of the
arrow. Install one 9V battery (not included) in the compartment, mak-
ing sure to match polarity with the diagram inside the battery compart-
C
ongratulations on your purchase of Excalibur
Electronics’ radio-controlled Smart City Coupé
Scale car. This full-function model has features that
include air-filled rubber tires, telescopic antenna, front-
wheel and steering trimmer. The radio transmitter is also
included.
Your Smart City-Coupé is easy to use, but be sure to use it
safely. Before starting, please read this manual thoroughly,
especially noting safety, care and battery information.
Keep this manual for reference.
The legendary King Arthur brandished a
magic sword, Excalibur, from which we
take our company name. With this unique
weapon in his hands, he could not be van-
quished.
Although Excalibur Electronics can’t claim
the magical secrets of Merlin, King
Arthur’s court wizard, sometimes our
patented technology may make it seem as if
we could. The radio-controlled Smart City
Coupé is another unmatched innovation of
Excalibur Electronics.
We make you think.