Everpure MR-20 - Manual (Page 2)

MR-20 Replacement Cartridge
Overall Dimensions:
14.5”H x 3.25”D
Daily Production Rate:
21 GPD (79.5 lpd) Nominal. Water pressure,
feedwater quality and temperature will effect
actual daily production rate
Service Flow Rate:
Dependant on water volume and pressure in
storage tank(s), and line size(s) to equipment
Pressure Requirements:
40 - 100 psi (276-689 kPa), non-shock.
Inlet Temperature:
35 - 100°F (2-38°C)
Inlet TDS:
1,500 ppm max recommended
The contaminants or other substances
removed or reduced by this system are not
necessarily in your water. Do not
use with water that is microbiologically
unsafe or of unknown quality without
adequate disinfection before or after
the system.
Mineral Reduction Cartridge
Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.