Kichler 339401 - Manual (Page 10)

9
Fig. 16
Fig. 17
11. INSTALLING THE LIGHT FIXTURE
Light fixture
Lamps
Glass shade
Socket nut
Socket nut wrench
Switch house
mounting plate
Wire connector
Screws
1. While holding the light light fixture under
your ceiling fan, push the square wire
connectors together. One from the fan and
one from the light fixture. (Fig.18)
NOTE: These connectors are color coded and
will ONLY engage when the colored strips are
matched (aligned).
2. Carefully push all the wires into the switch
housing assembly.
Attach the light fixture assembly to the Switch
Housing Mounting Plate with the screws
provided. Make sure each screw is tight.
(Fig. 16)
3. Remove the socket nuts from each socket.
Insert a glass shade into the glass holder,
then replace and tighten the socket nut until it
is tighten firmly. Repeat this procedure for the
remaining glass shades. (Fig. 17)
NOTE: A Socket Nut Wrench has been
provided to help in this installation.
4. Install 4, 13 Watt compact fluorescent
lamps (included). (Fig. 17)
5. Attach two pull chain fobs to each of the
beaded pull chains.