Extron electronic TP Receivers - Manual (Page 21)

TP Receivers • Installation and Operation 2-9
TP R 15HD A only — For optional rack mounting, mount the
receiver on a VersaTools 3.5" deep 1U Rack Shelf (Extron part
#60-190-20) (figure 2-4). The TP R 15HD A mounts in one of four
locations on the rack.
(2) 4-40 x 3/16" screws
Use 2 Mounting Holes on
Opposite Corners
VersaTools Rack Shelf
1/4 Rack Width False Front
Face Plate
TP R
15H
D A
RGB
PEA KIN G
LEV EL
TP R
15H
D A
RGB
PEA KIN G
LEV EL
TP R
15H
D A
RGB
PEA KIN G
LEV EL
Figure 2-4 — VersaTools rack mounting the TP R 15HD A
1 . If feet were previously installed on the bottom of the
receiver, remove them.
2 . Mount the receiver on the rack shelf, using two
4-40 x 3/16" screws in opposite (diagonal) corners to
secure the receiver to the shelf.
3 . Install blank panel(s) (included in the 1U universal and
VersaTools rack kits, optional for the 1U basic rack kit) or
other unit(s) to the rack shelf.
N Only the TP R 15HD A and products in the Extron
VersaTools line can be mounted on a VersaTools shelf.
Any 1U rack‑mountable Extron product can be mounted
on the standard shelf.
Furniture mounting
All receiver models can be mounted under furniture such
as a table or podium surface using the appropriate optional
mounting bracket; the Extron Under-Desk Mounting Kit for 1/8
and 1/4 Rack Width Products (part #70-212-01) (TP R 15 HD A)
or Under-Desk Mounting Kit for 1/2 Rack Width Products (part
#70-077-01) (all other models).