Getting started, Timers, Setting clock at power up – Electrolux 316471400 User Manual

Page 11

Advertising
background image

11

Timers

Getting Started

Setting clock at power up

You will be prompted to enter the time of day in the
event of a

power failure or when you first provide

electric power to your appliance.
• When your appliance is first powered up, 12:00

will flash in the display.

• Enter the time of day using the numeric key

pads and press

START to set.

If an invalid time of day is entered, the control will
triple beep. Re-enter a valid time of day and
press

START. If CANCEL is pressed your clock

will start with the time set for

12:00.

Select the user pref key to modify the time of day
during other situations such as day light savings.

See example below to set the timer for 5 minutes:

Example

Step

Press

3. Press

TIMER

1. Press

TIMER

2. Enter

5 minutes

NOTE

The timer(s) will not affect the cooking process.

The two timers provided with the oven control
serve as extra reminders in the kitchen. When a
timer reaches less than 1 minute the display will
start to count down in seconds. When the time
runs out the active timer will beep, “

00:00” will

display and the timer key will flash.

The following time settings apply to the timers:

• Min. time: 1 minute
• Max. time: 11 hours 59 minutes

To cancel after setting the timer, press the

TIMER

key again.

Advertising