Everpure 4CB5-MR Cartridge E17-17 - Manual (Page 2)

27"
22.5"
25"
22.5"
OUTLET
3/8" FNPT
INLET
3/8" FNPT
MRS-20
Overall Dimensions:
Processor - 25”H x 22.5"”W x 5”D
Tank - 27”H x 22.5"”W x 11.25”D
Inlet and Outlet connection:
3/8” OD John Guest tubing fitting (provided)
3/8" ID beverage hose
Wastewater line and Sample port connection:
1/4" OD John Guest tubing fitting (provided)
Steamer manifold connection:
1/4" quick connect on tubing coil (provided)
Steamer feed hose connection:
3/8" barb on tubing coil (provided)
Pressure Requirements:
10 psi -125 psi (0.7 – 8.6 bar), non-shock
Water Supply:
0.5 gpm (1.9L) @ 50-85 psi (280-595 Kpa)
Inlet Temperature:
40°F - 100°F (4-38°C)
Inlet TDS:
1,500 ppm max recommended
Operating Weight: 50 lbs.
The contaminants or other substances
removed or reduced by this drinking water
system are not necessarily in your water. Do
not use with water that is microbiologically
unsafe or of unknown quality without
adequate disinfection before or after the
system. Systems certified for cyst reduction
may be used with disinfected water that may
contain filterable cysts.
MRS-20T
Everpure, LLC
1040 Muirfield Drive
Hanover Park, IL 60133
Ph: 630-307-3000 Fax: 630-307-3030
Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.