Technical specifications, Important safety information, Chest belt – Crivit 1-LD3604-х User Manual

Page 41

Advertising
background image

- 79 -

Technical specifications


Heart rate monitor

Operating temperature

0-50°C

Dimensions

4,3 x 5,3 x 1,5 cm

Display

2,4 x 1,9 cm

Weight

47g

Battery

CR 2032/3V


Chest belt

Operating temperature

0-50°C

Dimensions

7 x 3,3 x 1,2 cm

Frequency

110 kHz

Weight

52g

Battery

CR 2032/3V

Important safety information

ATTENTION: Consult your doctor before you begin any
training program. Your doctor can help you choose the
proper training intensity and heart rate guidelines for your
exercises.
This heart rate monitor is not a medical device and should
only be used as a guide for your training.

- Batteries
Insert the batteries/rechargeable batteries in the correct polarity. Don’t try to
recharge non-rechargeable batteries and under no circumstances throw them into
fire. Danger of explosion.
Do not use unequal batteries (old and new, Alkaline and carbon, etc.)
simultaneously. If you will not use the device for a long time, remove the batteries

- 80 -

and store the device in a dry and dust-free place. Improper use of batteries may
cause an explosion or leakage. If the batteries have leaked, use gloves and clean
the heart rate monitor thoroughly with a dry cloth.
Batteries/rechargeable batteries can be life threatening when swallowed. Store
the batteries where they cannot be reached by small children. If a battery is
swallowed, medical aid must be sought immediately.

- Heart rate monitor should not be in the hands of children

Never let children use electrical devices unsupervised. Children can’t always
recognize the possible dangers properly. Batteries/rechargeable batteries can be
life threatening when swallowed. Store the batteries where they cannot be
reached by small children. If a battery is swallowed, medical aid must be sought
immediately.

Also keep the packaging foils away from children. Danger of suffocation.

Chest belt


Inserting the batteries into the chest belt
Use a coin to unscrew the battery cover on the back side of the chest belt and
insert the 3V battery with the (+) sign facing up. Screw the battery compartment
cover back into the case.

battery CR2032

Advertising