Crivit FW-1399 - Manual (Page 12)

12
Assembly instructions
note: 2 people recommended for assembly.
Remove the cable ties on
frame (A) and fit the frame
into the notches (B)
(Fig. 1).
You will need the following tools
(not included) to mount the wall
bracket:
• 1 x drill
• 1 x 8 mm – drill
• 1 x crosshead screwdriver
Hold wall bracket up to wall in a suitable location and mark 6 mounting holes with a
pencil. Drill mounting holes as marked and insert wall plugs into holes to be flush with
surface. Attach wall bracket to wall using the 6 screws.
ensure bracket (A) is firmly in position (fig. 2).
using the Article
Hang bicycles on the wall bracket notches. Wall bracket holds up to 2 bicycles.
Release latch (C) (fig. 2) and fold bracket when bicycle wall bracket is not in use.
care and storage
The bicycle wall bracket should be cleaned regularly with warm water and pH-neutral
soap, then wiped dry with a cloth. Avoid harsh chemical agents (e.g. solvents)
disposal
Please dispose of the product and packaging in an environmentally friendly manner,
separating different materials for recycling as required! Dispose of this item through an
authorised disposal company or through your local waste disposal facilities - ask your
local authority for information if further guidance is required. Ensure that you comply with
all regulations currently in force.
fig. 2 c
fig. 1
A
B