EVGA nForce 630i - Manual

Before You Begin…
Parts NOT in the Kit
This kit contains all the hardware necessary to install and connect your new EVGA
e-7050/610i GPU motherboard with integrated GeForce graphics processing. However, it
does not contain the following items that must be purchased separately to make the
motherboard fully functional.
‰ Intel microprocessor:
‰ Cooling fan and heat sink for the microprocessor
‰ System memory support
‰ Hard Disk Drive(s)
‰ Operating System
‰ Power Supply
‰ Graphics Card
EVGA assumes you have purchased all necessary parts needed to allow for proper system
functionality.
Motherboard Specifications
‰ Size
mATX form factor.
‰ Microprocessor support
Intel Core 2 Extreme, Intel Core 2 Quad, Intel Core 2 Duo, Pentium EE, Pentium, and
Celeron. (The e-7050/610i supports up to 1066MHz FSB CPU’s)
‰ Operating systems
Supports Windows XP and Windows Vista.
‰ Contains an NVIDIA nForce MCP and integrated GeForce graphics
‰ System Memory
• Single-channel DDR2 667/533
• Supports up to 4 GB DDR2 memory (2GB x 2)
‰ USB 2.0 Ports
• Supports hot plug
• Up to eight (4 onboard) USB 2.0 ports
• Supports USB 2.0 protocol up to 480Mbps transmission rate