Crivit AS-1461 - Manual (Page 22)

22
• Always wear suitable protective equipment (helmet, hand, wrist, elbow and knee guards) as
well as shoes!
• Always be considerate of other people!
• Only use the product on suitable surfaces that are smooth, clean and dry. Ride as far away
from other road users as possible. Stay away from downhill terrain, steps and open bodies of
water.
• Never ride in the dark or in poor visibility.
• The brake will get hot if it is continuously used. To prevent burns, do not touch the brake
before it has cooled down.
• Do not allow your child to use the product without supervision, as children cannot evaluate
the potential risks.
Avoiding damage to the Product!
• Avoid water, oil, pot holes and very rough surfaces.
Assembly
(Images are examples for all product variations)
The product is delivered folded up in its transport condition. To make it ready to ride, proceed
as follows:
unfold
1. Release the lower quick locking mechanism (1).
2. Turn the knob (2) clockwise and press the steering
post (3) forward until it locks into place.
3. Secure the folding mechanism by clamping the quick
locking mechanism into place.
Attach handlebars
1. Release the handlebars (4) from the holders (5).
2. Press down on the locking buttons (6) on the handle-
bars and push the handlebars into the T-pipe (7) on
both sides of the steering column. The locking buttons
must audibly click into the designated holes (8).
Adjusting the steering post height
the steering post can be adjusted to four different heights.
only use the product after clicking the locking button into one
of the four holes and securing the steering post with the
quick-release fastener!
1. Loosen the quick-release fastener (9) on the steering post.
2. Pull the steering post (10) upward until the locking button (11) locks into
one of the four holes (12).
3. Secure the steering post by tightening the quick-release fastener.
(4)
(5)
(6)
(7)
(8)
(11)
(12)
(10)
(9)
(1)
(3)
(2)