Enterasys Networks VHSIM2-A6DP - Manual (Page 42)

Accessing the VHSIM2-A6DP ATM Screen
3-8 Local Management
3.2 ACCESSING THE VHSIM2-A6DP ATM SCREEN
To access the VHSIM2-A6DP ATM screen in a standalone device (e.g., 2E42-27), navigate
through the Local Management screens until the High Speed Configuration screen displays. Select
VHSIM2-A6DP CONFIGURATION from the High Speed Configuration screen and press
ENTER. The VHSIM2-A6DP ATM screen displays. See
Figure 3-3 .
To access the VHSIM2-A6DP ATM screen from an interface module (e.g., 6E132-25) navigate
through the Local Management screens until the Module Specific Configuration Menu screen
displays. Select HIGH SPEED CONFIGURATION from the Module Specific Menu screen and
press ENTER. The VHSIM2-A6DP ATM screen displays. See
Figure 3-3 .
Figure 3-3 VHSIM2-A6DP ATM Screen
The VHSIM2-A6DP ATM screen displays up to six menu items for configuration and monitoring
of the VHSIM2-A6DP. The following list explains each of the VHSIM2-A6DP ATM screen
fields:
CONNECTIONS
This menu item opens the ATM Connections screen. This menu screen is used to view the current
configured virtual connections (PVCs and SVCs) of the VHSIM2-A6DP and to view the ATM
connections by virtual interface. The ATM Connections screen provides access to the Traffic
Management PVC Priority Assignments or the Add/Delete Entry screen, depending on the
operational mode of the device. These screens are used to add, modify, or delete PVCs. When the
operational mode of the device is set to 802.1Q, the Traffic Management PVC Priority
Assignments screen displays. When the operational mode of the device is set to SecureFast, the
Add/Delete Entry screen displays. For details, refer to
Section 3.3 .
CONNECTIONS
PHYSICAL PORT CONFIGURATION
LAN EMULATION CLIENTS
SIGNALLING
TRAFFIC MANAGEMENT
DISCOVERY ELAN SETUP
RETURN EXIT
28251_10