Elta 2382IP - Manual (Page 18)

MP3 Mode:
•
Press [ ID3/FIND/ST./ESP]this key once, FILE search mode changed.
• Press SKIP/TUNING or SKIP/TUNING to select the desired FILE.
• Press [ ID3/FIND/ST./ESP]this key twice, ALBUM search mode changed.
• Press SKIP/TUNING or SKIP/TUNING keys When the desired ALBUM track is displayed,.
• Press the PLAY keys then start play the track.
• Press [ ID3/FIND/ST./ESP] this key for more than 3-5 sec, ID3 TAG is displayed.
• Press [ ID3/FIND/ST./ESP] this key again for more than 3-5 sec, return the Playing time display.
RADIO Mode:
•
Press [ ID3/FIND/ST./ESP] this key select the FM Stereo and Mono Mode.
EQ CONTROL
•
EQ shows the present sound tone.
• When you press the EQ button, the sound tone changes: PASS >CLASSIC >ROCK > POP >JAZZ >
MUTE
•
Mute the sound.
VOLUME+/–
•
Increases volume.
• Reduces volume.
TIMER ON/OFF
1. In any mode hold [TIMER] key for more than 3-5 sec, display then the hour digit of will flashes.
2. Press SKIP/TUNING
or SKIP/TUNING to set the correct hour.
3. Press [TIMER] again to select the minutes setting, the third fourth digit of flashes,
4. press the SKIP/TUNING
or SKIP/TUNING to set the correct minutes. Press [TIMER] to lock in the correct minute.
5. Press [TIMER] again to display TIMER OFF, Press [TIMER] again to hour digit of will flashes .
6. Press SKIP/TUNING
or SKIP/TUNING to set the correct hour.
7. Press [TIMER] again to select the minutes setting, the third fourth digit of flashes,
8. press the SKIP/TUNING
or SKIP/TUNING to set the correct minutes. Press [TIMER] to lock in the correct minute.
9. Press [TIMER] again to select the function setting, the function of flashes,
10. press the SKIP/TUNING
or SKIP/TUNING to set the desired function station.
11. Press [TIMER] again to the volume Increases or Reduces setting, the volume of flashes,
12. press the SKIP/TUNING
or SKIP/TUNING to set the desired volume sound level station.
13. Press [TIMER] key again until it return to normal mode and the display will show the logo.
SLEEP
•
Press sleep key to turn on sleep function, change sleep time and turn off sleep function; The display will change from
90>80>70>-->10 off; If sleep key is activated, the system will count down until sleep time is zero, then the system turn off
automatically.
18.
02-2382IP-GB 9/15/06 12:10 PM Page 18