Florabest FHE 550 A1 - Manual (Page 15)

15
GB
overload or incorrect use is excluded
from the guarantee. Certain compo-
nents are subject to normal wear and
tear and are excluded from the guaran-
tee.
• Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused
from material or manufacturing faults,
will be made good free of charge, by
replacement delivery or repair.
• Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our
service center will be glad to provide
you with a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• Defective units returned to us will be
disposed of for free.
Spare parts
The following spares are available from
Grizzly Service-Center. Please indicate the
machine type and the number of the spare
part with your order.
Saw chain .................................3009 1400
Chain bar ..................................3010 0100
Bio chain oil 1 liter ....................3023 0001
Bio chain oil 5 liter ....................3023 0002
If further spare parts should be neces-
sary, please find the part number on the
exploded drawings.
Technical Data
High pruning saw ................ FHE 550 A1
Rated input voltage..............230V~, 50 Hz
Input power ..................................... 550 W
Safety class ......................................... II
Chain speed ................................10,8 m/s
Weight (without guide rail + chain) .... 4,1 kg
Weight (with guide rail + chain) .......4,6 kg
Oiltank ............................................70 cm 3
Chain ............................Oregon 91 P040X
Chain pitch..............................................3/8“
Chain bar ....10“ Oregon OE 100SDEA041
Number of chain drive links......................40
Chain width ....................................1,3 mm
Teeth of the sprocket chain wheel ...........6
Sawing length (max.) ....................260 mm
Acoustic pressure level
(L
pA
) .................. 88 dB(A);K
pA
=1,5 dB(A)
Sound power level (L
wA
)
guaranteed ..........................104,0 dB(A)
measured ...102,2 dB(A); K
wA
=1,5 dB(A)
Vibration (a
n
)
at the handle ............ 3,0 m/s 2 ; K=2,5 m/s 2
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.