EverFocus EDH5240 User Manual

Page 20

Advertising
background image

- 19 -

Select “Return” to return to the previous menu.

4.3 Day/Night

These settings control the operation of the camera when the illumination level changes. Choices are
Color at all times; B/W at all times; or color when illumination is bright, switching to B/W in low light.

Please select one of the 3 modes below by moving the joystick UP or DOWN then press “Set” button to
save the setting:

• AUTO: The picture switches to color in a normal (bright) environment and switches to B/W

when the ambient illumination is low. The switching point is determined by the AGC level.

• COLOR: The picture is always displayed in color, even at low light levels.
• B/W: The picture is always displayed in B/W.

Select “Return” to return to the previous menu.




4.4 Special

In this section, user can do special settings including Resolution, Camera Title, D-Effect, TV-Out,
Language and Default. Please select the item by moving the joystick UP or DOWN then press SET to
enter the settings. Select “Return” to return to the previous menu.

4.4.1 Resolution


1. Select camera resolution from 720p60Hz; 1080i60Hz or 1080p30Hz when TV output format is

NTSC, 720p50Hz; 1080i50Hz or 1080p25Hz when TV output format is PAL by moving the joystick
UP or DOWN then press “Set” button to save the setting

2. Display On: Press “Set” to switch between On/Off, whether to show current resolution.

Select “Return” to return to the previous menu.

4.4.2 Camera Title

Select “On” by moving the joystick UP or DOWN then press “Set” to enter the setting. Input a camera
title by moving the joystick UP and Down, cursor will navigate among characters and numbers. The
available letters are A-Z and 0-9. Press “Set” key to confirm. Move the joystick Left and Right to move
the cursor among the same level.

Select “Off” by moving the joystick UP or DOWN then press “Set” to disable the camera title display.

Select “Return” to return to the previous menu.

NOTE:
AGC selection must be set as middle or high in order to employ the auto switching function.

Advertising