Epson ES-1000C - Manual (Page 5)

Installing the SCSI Interface Card
Follow the steps below to install the SCSI interface card in your
computer. For additional information, see the manuals for your
interface card and computer.
If you are already using a SCSI adapter in your computer for
other SCSI devices, such as an external hard disk, see Chapter
of the
User 's Guide for inform ation on including the
scanner in an existing SCSI daisy-chain.
Note:
Your must be compatible with
software to use the EPSON Scanning Utilities that control your
scanner.
Turn off the computer and any peripheral devices.
2. Disconnect the computer’s power cable from the electrical
outlet and from the back panel. Also disconnect any other
cables, including the keyboard cable.
3. Remove the cover from your computer. If you need detailed
instructions, see your computer manual.
4. Before you touch any of the computer’s internal components,
touch an unpainted metal surface inside the computer case
to discharge any static electricity.
5. Choose an option slot for the interface card. You can install
the card in any available slot.
6. Remove the retaining screw from the option slot cover and
remove the slot cover. Keep the screw to secure the
interface card to the computer. Store the slot cover in a safe
place in case you remove the interface card later.
3