Florabest FMH 2400 B2 - Manual (Page 11)

11
GB
two blocking apertures appears. Now
block the blade plate (16) by slotting
the screwdriver right through it.
• Use the Allen wrench (15) to unscrew
the screw (17) in the blade plate (16)
and remove the blade (18).
To assemble the blade you must
use a new screw and tighten it with
an torque of 16 Nm.
Maintenance and cleaning
Leave all work not described in
this manual to an authorised cu-
stomer service centre. Only use
original parts.
Wear hand protection when work- Wear hand protection when work-
ing on the blade.
Before starting to service or clean
the unit, turn off the unit, pull the
power plug, and wait until the blade
stands still. There is a risk of injury
and a risk to life from electric shock,
fire and rotating blades.
General cleaning and servicing
Do not spray water onto the
shredder. Electric shock hazard.
• Always keep the shredder, wheels and
air vents clean. Use a brush or cloth to
clean it, avoid cleaners and solvents.
• Always check that the shredder and
especially the guards are not worn
down or damaged but firmly attached
before use. Check that the nuts, bolts
and screws are tight.
• Check the covers and guards for dam-
age and improper attachment. If nec-
essary, change the components
• Keep the shredder in a dry place out
of children’s reach. Do not cover the
shredder in nylon bags, as moisture
may develop.
Replacement parts
Replacement parts can be ordered direct-
ly from our service centre (see address on
page 80). In your order, quote the equip-
ment type and position number in the
exploded view.
Screw........................................ 91093082
Blade ........................................ 91093080
Waste disposal and
environmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
Hand over the device at an utilization lo-
cation. The plastic and metal parts emplo-
yed can be separated out into pure mate-
rials and recycling can be implemented.
Ask your Service Center about this.
Guarantee
• We provide a 36-month guarantee on
this unit, or 12 months for commercial
use according to the statutory regula-
tions in Germany.
If you have reason to launch a claim
on guarantee, please call our serv-
ice centre (see page 80 for our tel.,
fax and e-mail address). They will
give you further information on the
complaints management process.
• The guarantee does not cover damage
from natural wear, overloading or im-
proper use. Certain components, such
as the blade are subject to normal
wear and are not covered by guaran-
tee.