Electrolux RH42PC60GS - Manual (Page 11)

11
A1
A
B
A
Installing the hood
To place the upper duct covers, make sure that the duct cover’s tabs are aligned
and inserted into the stainless steel duct cover support’s slots as shown in image
“A”. While aligning and inserting the tabs, the lower part of the duct cover must
be pushing the metal spring inside at all times as shown in “A1”. Keep the duct cover
in this position.
To lock the upper duct cover in place, slide it upwards making sure that all tabs stay
inside the respective slots. When sliding the duct cover upwards, make sure that the
lower part of the duct cover is locked with the metal spring as shown in “B”. A click
sound will be heard. Note: 2 persons are needed for this operation.
Place lower duct covers using one plastic bracket at each vertex ( 4 needed). The lower duct cover must be secured to the ranger
hood with 4 assembly screws.