Shivaki STV-24LEDGW9 - Manual (Page 27)

REMOVE TV STAND PROCEDURE TECHNICAL SPECIFICATIONS CHART
Power supply AC: AC 100-240V~ 50/60 Hz
Program memory Analog :100CH
RF Aerial input: 75 Ohm (Co-axial)
Loudspeaker impedance: 4 Ohm
Sound systems: NICAM/A2
Batteries: 2xCR2025
Broadcasting systems received: PAL (B/G, D/K, I)
SECAM (B/G, D/K, L)
DVB-T/C
If you want to remove the TV stand from the TV sets, unscrew 4 screws under the stand
RE-INSTALL TV STAND PROCEDURE
If you want to put the TV stand back to the TV set, screw back all the screws in clockwise direction as
shown at
4
50 51
Digital : 400CH