EdgeStar AP410W - Manual (Page 9)

Window installation
This portable air conditioner ships with a plastic window kit for temporary mounting
in standard windows. The plastic window kit comes in three sections, and its size is
adjustable. If you window is too small to fit the plastic window kit in, the parts may
be easily cut to size with a hacksaw.
CAUTION: Do not attempt to cut the window kit to size unless you are a skilled
hacksaw operator and please take all necessary safety measures.
1. Open your window, insert the plastic window kit, and adjust the window kit to the
appropriate size.
2. Once you have properly sized the window kit for the window, close the window
tightly onto the window kit. You may need to use screws to hold the window kit
in place.
3. Position the portable air conditioner near the window, extend the exhaust hose as
far as you need to, and place the end of the exhaust hose (which is in the round
adapter) into the hole in the window kit.
4. Match up the holes in the round adapter with the holes in the window kit and
screw the round adapter to the window kit.
CAUTION: Use appropriate safety measures while working with screws or tools.
CAUTION: Once the window kit is in place, it is unlikely that your window can then
be locked shut. Please take all necessary precautions.
9