Safety information – Melinera Z30233A-BS/Z30233B-BS User Manual
Page 6
8 GB/IE/CY
Melinera
®
Safety information
J
Replace defective bulbs immediately by new bulbs. Ensure
that the type, operating voltage and wattage agree with those
of the original. Use no bulb types other than the above-
indicated bulbs.
J
Fix the light set in place with the supplied attachment clips only.
Avoid the danger of
death from electric shock!
J
Before use, ensure that the mains voltage available is the
same as the required operating voltage for the device
(230 V ~).
J
Before connecting the device to the mains you should always
check the light chain and the mains plug for any damage.
J
Never use the light chain if you discover that it is damaged in
any way.
J
This light set‘s external flexible tube is non-replaceable. Hence
if it becomes damaged you must dispose of the entire light chain.
J
Never open any of the electrical parts or insert any kind of
object into them.
J
Protect the mains cable from sharp edges, mechanical loads
and hot surfaces.
J
Do not install with sharp fasteners or nails.
J
Always unplug the mains plug from the socket before installation,
dismantling or cleaning.
J
Never touch the light chain plug or the light chain itself with
wet hands.
J
Keep the light set and mains plug away from moisture.
J
The light chain must not be electrically connected to another
light chain.
66410_BS_mel_LED-Lichterkette_Content_LB6.indd 8
05.05.11 12:41