Eiki LC-XT9 - Manual (Page 24)

24
BASIC OPERATION
KEYSTONE ADJUSTMENT
1 Press KEYSTONE button on Remote Control Unit or select
Keystone on SETTING menu. (Refer to page 39.) Keystone
dialog box appears.
2 Correct keystone distortion by pressing POINT UP/DOWN
button(s). Press POINT UP button to reduce upper part of
image, and press POINT DOWN button to reduce lower part.
Reduce upper width with POINT UP button. Reduce lower width with POINT DOWN button.
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
ADJUSTING SCREEN
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Zoom
Focus
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1 Press ZOOM ▲/▼ button on Side Control or on Remote Control
Unit. Message “Zoom” is displayed.
2 Press ZOOM ▲ button to make image larger, and press ZOOM
▼ button to make image smaller.
1 Press FOCUS ▲/▼ button on Side Control or on Remote Control
Unit. Message “Focus” is displayed.
2 Adjust focus of image by pressing FOCUS ▲/▼ button(s) .
LENS SHIFT ADJUSTMENT
Message disappears after 4 seconds.
Lens shift
1 Press the LENS SHIFT button on Side Control or on the Remote
Control Unit. Message “Lens shift” is displayed.
2 Press POINT UP button to move image up, press POINT DOWN
button to move image down, press POINT LEFT to move image
left and press POINT RIGHT to move image right.
Message disappears after 4 seconds.