Melinera 102440-14-01-BS/ 102440-14-02-BS User Manual

Safety information, Technical data, Led fairy lights

Advertising
background image

GB/IE

GB/IE

GB/IE

GB/IE

GB/IE

Avoid the danger of
death from electric shock!

Before use, ensure that the mains voltage
available is the same as the required operating
voltage for the device (230–240 V~).

Before connecting the device to the mains
you should always check the light chain

1

and the mains adapter

2

for any damage.

Please ensure that all the bulb fitting sockets
have a bulb in them.

Never use the light chain

1

if you discover

that it is damaged in any way.

This light set‘s external flexible tube is non-
replaceable. Hence if it becomes damaged
you must dispose of the entire light chain

1

.

This article does not contain any parts which
can be serviced by the user. The bulbs cannot
be replaced.

Only use the light chain

1

with the supplied

mains adapter

2

for the type (Model No.

THDQ-P260050-BS); all warranty claims will
otherwise expire.

This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabili-
ties or lack of experience and knowledge if
they have been given supervision or instruc-
tion concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.

Ensure that the product is installed by suitably
experienced or qualified persons only.

CAUTION! RISK OF OVERHEATING!
Do not operate the light chain

1

inside the

packaging.

After use, keep the light chain

1

in the pack-

aging to prevent unwanted damage.

Do not pull the light chain

1

cable and make

sure it is laid down properly so that no one
walks or trips over it.

The product can be used on all surfaces officially
classified as being of “normal flammability“.

Do not attach any other objects to the product.

Safety Information

In the case of damage resulting from non-compli-
ance with these operating instructions the guaran-
tee claim becomes invalid! No liability is accept-
ed for consequential damage! In the case of
material damage or personal injury caused by in-
correct handling or non-compliance with the safe-
ty instructions, no liability is accepted!

DANGER OF

DEATH AND ACCIDENTS FOR
TODDLERS AND CHILDREN!

Never leave children unsupervised with the
packaging material. The packaging material

represents a danger of suffocation. Children
frequently underestimate the dangers. Please
keep children away from the device at all times.

This device is not a toy and should not be
played by children. Children are not able to
understand the dangers that can occur when
handling this device.

Q

Technical data

LED Fairy Lights

1

:

Operating voltage: 26 V
Bulb:

80 x max. 0.06 W, 3 V
(bulbs are non-replaceable)

Protection class:
Light chain (Model No. 102440-14-01-BS /
102440-14-02-BS)

LED Colour:

102440-14-01-BS:
Warm white

102440-14-02-BS:
Cool white

Mains adapter

2

:

Nominal voltage
primary:

230–240 V~, 50 Hz

Nominal voltage
secondary:

26 V , 5 W

Protection class:
Mains adapter (Model No. THDQ-P260050-BS)

LED Fairy Lights

Q

Proper use

This product is suitable for indoors and outdoor use.
This product is intended for use in private, domestic
enviroment only and not for commercial purposes.

Q

Delivery scope

1 LED Fairy Lights
1 Mains adapter
1 Operating manual

Q

Description of Parts

1

LED Fairy Lights

2

Mains adapter

3

Control Box

1

1 x

2

1 x

LED FAIRY LIGHTS

Operation and Safety Notes

3

1 x

LED FAIRY LIGHTS

IAN 102440

Advertising