Epson 1500 - Manual (Page 89)

SelecType tutorial
1. Note that the first thing you will see on the display before
entering SelecType is:
READY : P LJ-2P
For the ActionLaser 1500, you will see READY:P 3/P/Si.
Make a note of the interface channel, for example,
P=parallel. You may need this information later.
2. Press the LEVEL1 button to enter SelecType Level 1.
3. The main menu option appears. The icon indicates that
you can enter the submenu by pressing . In many cases,
the display also shows the current setting, as shown below.
INPUT AUTO LT
4. Enter the options submenu by pressing .
INPUT AUTO L T S E T
indicates the option is selected.
5. Display the other submenu options by pressing or .
INPUT STD SET
indicates the option is not selected. The message on the
right, SET, indicates you can select the option displayed
by pressing .
SelecType 4-5