Euro-Pro 5 LITER F1066 - Manual (Page 4)

Heating
Element
Guide
Edges
Safety
Switch
Control Panel
Using the Electronic Deep Fryer
Using Solid Fat
Warning: Do not put solid shortening in
the oil container or the frying basket.
• If using solid vegetable shortening, melt
it first in a separate pan and then very
carefully pour the melted fat into the oil
container.
• Previously used solid vegetable
shortening which has curdled and
hardened in the oil container should be
removed from the oil container and
melted in a separate pan before reusing.
Warning: If you try to melt the solidified
fat in the oil container, there is a risk of
warm melted fat suddenly sputtering from
below through the still solid top layer of fat.
Therefore use only the following procedure:
• Make sure the fat is at room
temperature. If the fat is very cold, there
is a greater risk of splashing.
• Using a fork, carefully make some holes
in the fat. Make sure the lid is securely
closed while fat is melting. Press the
"Function" Reset button and press timer
button to set the time you require.
OPERATING INSTRUCTIONS cont.
• Lift up the Control Panel with Heating
Element.
• Insert the "Guide Edges" on the Control
Panel into the "Guide Rails" mounted
on the metal body.
• Slide the "Guide Edges" down till the
end.
Important Notice: The Automatic
Safety Switch ensures that the unit will
not operate unless the Control Panel has
been inserted into the "Guide Rails" on
the metal body correctly.
Back of Main Body
Guide Rails
Installing the “Control Panel With
the Heating Element” Into its Place
Warning: Never plug in the Deep Fryer
before filling with oil to specified level.
Always make sure control panel is securely
in place in the body and the heating
element is inside the oil in the container
before plugging in.
Important: Ensure the control panel is
fitted correctly to the main unit otherwise
the unit will not function. This is not a
defect. This product is fitted with a safety
switch to prevent the unit from turning on
accidentally.
5
Pre-Heating
OPERATING INSTRUCTIONS cont.
6
Warning: Never plug in the Deep Fryer
before filling with oil. (See "Filling"
instructions on page 4.) Always unplug
the appliance when not in use.
• Make sure the oil level in the oil
container is between the "minimum "
and " maximum " lines inside the oil
container.
• The frying basket should not be
immersed in the oil during the pre-
heating.
• Replace the lid cover.
• Plug the appliance into a 120-volt
outlet.The unit beeps .
• Press the power button. The unit beeps
and the power indicator light comes on .
It’s showing that the power on. The
upper screen display 320
°F and the
lower screen displays _ _: _ _ . It’s in
constant boiling status.
• Set the required temperature – The
temperature is adjustable from 155
°F
to 385 °F in 5ºF increments. If you
want to elevate the temperature, press
the button. When you press the button
the unit will beep. If you want to lower
the temperature, press the button.
When you press the button the unit will
beep and the upper screen will display
the temperature that you set. When the
setting temperature is reached, the
green ready indicator light come on.
Fig. 3
• Timer: The MAX timer time is 15
minutes. If you want to add time, please
press "+" button. If you want to
subtract time please, press "-" button.
The lower screen will display the time
that you set.
• Reset function: If you press the function
reset button, the unit is in default status.
The default temperature is 320
°F and
the default time is 00:00.
9. Function Reset Button
10. Power Button
11. / 12. Timer Adjustable Button
13. / 14. Temperature Adjustable Button
15. Digital Display
16. Ready Indicator Light (green)
17. Power Indicator Light (red)
Fig. 3