Eton FR600 User Manual
Page 9
SOLARLINLK FR600 OWNER’S MANUAL
16
17
SOLARLINLK FR600 OWNER’S MANUAL
SETTING COUNTY CODES (CLC CODES IN CANADA)
County code setting is described below.
A county code instructs the radio only to receive an ALERT when
the code is programmed in. Look up a United States county code at
the following web site:
http://www.nws.noaa.gov/nwr/indexnw.htm#sametable
Look up a Canadian CLC code at:
http://www.msc-smc.ec.gc.ca/msb/weatheradio/transmitter/
index_e.cfm
Your radio can be set for one (SINGL) to 23 (MULTI) codes, or can
be set to receive ALL coded information sent from any transmit-
ter, if your within range. When you set codes, it will only pick up
alerts when you’re in that county or within reception distance of
the signal.
To set codes:
1) Revolve the <Band Selecting Knob> to the “OFF”
position.
2) Press the <MENU> button shortly to enter the setting
menu.
3) Press or shortly to select the “COUNTY CODE” option.
4) Press <SELECT> shortly once to enter the county code setting
mode (MULTI, SINGL or ALL), which blinks in the display.
5) If you don’t know your county code, select ALL with or and
press <SELECT> and then <MENU> TO EXIT. If you know your
code, don’t press SELECT and go to the next section.
6) Press or shortly to select MULTI or SINGL and press
<SELECT>.
7) Press <SELECT> shortly again to enter the code. CODE 01
XXXXXX appears in the display, with 01 flashing.
8) Press <SELECT> again and the first digit of six starts flashing.
Press or to set the first digit and then press to go to the
second digit, doing this again and again until all six digits are
entered.
9) If you’re in SINGL, press <SELECT> and then <MENU> to exit.
If in MULTI, go to the next step.
10) If you’re in MULTI and wish to enter more codes, press
<ENTER>.
11) 01 flashes. Press or to go to another code setting num-
ber (1-23 flashes) and press <ENTER>.
12) The first digit of six flashes, use or to set it and press to
enter the next number, doing this again and again until all six
digits are entered.
13) Press <ENTER> to choose another code number (1-23) and
when your finished press <ENTER> and then MENU to exit.
RECEPTION OF EVENT CODES
Your radio can receive ‘event code’ information during weather
alerts. These codes are identified at http://www.nws.noaa.gov/os/
eas_codes.shtml.
Canadian Weather Alerts are addressed at: http://www.msc-smc.
ec.gc.ca/cd/brochures/warning_e.cfm#top.