Handling fuel – Echo CS-600P User Manual

Page 15

Advertising
background image

13

CS-600P

HANDLING FUEL

MIXING INSTRUCTIONS -
1. Fill an approved fuel container with half of the

required amount of gasoline.

2. Add the proper amount of two-stroke oil to

gasoline.

3. Close container and shake to mix oil with

gasoline.

4. Add remaining gasoline, close fuel container,

and remix.

IMPORTANT

• Spilled fuel is a leading cause of hydrocarbon

emissions. Some states may require the use of
automatic fuel shut-off containers to reduce fuel
spillage.

• Stored fuel ages.

Do not mix more fuel than you expect to use in
thirty (30) days, ninety (90) days when a fuel
stabilizer is added.

• Stored two-stroke fuel may separate. ALWAYS

shake fuel container thoroughly before each
use.

AFTER USE -
DO NOT store a unit with fuel in its tank. Leaks can
occur. Return unused fuel to an approved fuel
storage container.

STORAGE -
Fuel storage laws vary by locality. Contact your
local government for the laws affecting your area.
As a precaution, store fuel in an approved, airtight
container. Store in a well-ventilated, unoccupied
building, away from sparks and flames.

DANGER

Fuel is VERY flammable. Use extreme care
when mixing, storing or handling or serious
personal injury may result.
• Use an approved fuel container.
• DO NOT smoke near fuel.
• DO NOT allow flames or sparks near fuel.
• Fuel tanks/cans may be under pressure.

Always loosen fuel caps slowly allowing
pressure to equalize.

• NEVER refuel a unit when the engine is

HOT!

• NEVER refuel a unit with the engine

running.

• DO NOT fill fuel tanks indoors.

ALWAYS fill fuel tanks outdoors over bare
ground.

• Securely tighten fuel cap after refueling.
• Inspect for fuel leakage.

If fuel leakage is found, do not start or
operate unit until leakage is repaired.

• Move at least 3 m (10 feet) from refueling

location before starting the engine.

Advertising