Eclipse - Fujitsu Ten AV8533 - Manual (Page 50)

Integrated Series Speakers
50
SE8375
5
×
7˝ 3-Way
• Continuous Power Handling: 40W
• Music Power Handling: 120W
SE8355
5-1/2˝ 3-Way
• Continuous Power Handling: 30W
• Music Power Handling: 90W
SE8405
4 × 10˝ 3-Way
• Continuous Power Handling: 35W
• Music Power Handling: 100W
ECLIPSE Integrated Series speakers are
integrated concentric units that are
designed to replace factory speakers for
significantly better music fidelity.
Hybrid Mica PP Cone Woofer
The ECLIPSE speaker cone is hybrid mica PP
for rigidity under intense power, ensuring
distortion-free performance.
Butyl rubber surround
The butyl rubber surround allows linear cone
excursion and dampens cone resonance for
undistorted dynamic peaks and clarity at all
levels.
Kapton voice coil former
Handles a large amount of heat without
deforming.
Tweeter protection
A solid state device protects the speaker system
from power overloads. This device will
momentarily shut down the tweeter circuit, and
will automatically reset when the condition
normalizes.
Super tweeter
(for SE8495, SE8375, SE8365,
SE8355, SE8405 only)
To accommodate the extended high frequency
response of DVD-Audio discs and to provide
superior treble reproduction, the 3-way units
incorporate a newly developed super tweeter
that goes all the way out to 40kHz (typically
50kHz).
Small neodymium tweeter
The use of a neodymium magnet improves
speaker efficiency.
SE8495
6
×
9˝ 4-Way
• Continuous Power Handling: 75W
• Music Power Handling: 220W
SE8495 SE8375 SE8465A
Size 6 × 9˝ 4-Way 5 × 7˝ 3-Way 4 × 6˝ 2-Way
Frequency Response 50 — 40,000Hz 85 — 40,000Hz 105 — 40,000Hz
Sensitivity 93dB 90dB 87dB
Hybrid Mica PP Cone ● ● ●
Rubber Surround ● ● ●
Kapton Voice Coil Former ● ● ●
Midrange Dome ● — —
Mylar Tweeter Dome ● ● ●
Super-Tweeter Dome ● ● ●
Neodymium Tweeter Magnet ● ● ●
Ferrite Woofer Magnet ● ● ●
Mounting Depth 3-1/16˝ 2-1/8˝ 1-3/4˝
D