Eureka Microphone Preamplifier User Manual
Page 14
CONTROLS & CONNECTIONS
14
All Input and Output connectors are servo balanced. XLR or ¼” TRS with the
following wiring standard:
XLR/TRS
PIN 1 / Sleeve GND
PIN 2/ Tip
High
(+)
PIN 3/ Ring
Low
(-)
INSERT: Return and Send connectors are provided for use in conjunction with
audio process devices such as reverbs, delays, de-essers, etc.
NOTE: The LINE IN jack does not work unless the LINE button on the front of the
unit is pushed in.
2 . 7 P O W E R S U P P L Y
The Power Jack on your EUREKA accepts a standard IEC cord like those found
on most computers and professional recorders.
The Power button on the Eureka is located next to the Power Jack.
Note: The input power voltage is set at the factory to correspond with the country
in which it was shipped..