Emptying the condensate tank – Electrolux 55800 User Manual

Page 16

Advertising
background image

16

Clean the entire filter area

3

The strainer area does not have to be cleaned after every drying cycle,
but should be checked regularly and cleaned of fluff if necessary.

6. To do this, grip the top of the large

mesh filter and pull it forwards un-
til it comes loose from the two
brackets.

7. Remove fluff from the entire filter

area. It is best to use a vacuum
cleaner for this purpose.

8. Press both journals of the large

mesh filter into the brackets on the
loading door until they snap into
place.

9. Re-insert fine strainer.

10. Press against the large mesh filter

until it locks into the interlock.

3

If the fine strainer is not fitted, the
large mesh filter will not snap into
place and the loading door cannot
be closed.

Emptying the condensate tank

Empty condensate tank after every drying cycle.
If the condensate tank is full, an active programme will break off auto-
matically and the EMPTY WATER display will light up. In order to con-
tinue the programme, the condensate tank must first be emptied.

1

Warning! The condensate is not suitable for drinking or for preparing
foodstuffs.

Advertising