Specifications, Dimensions, Six-pack shipping weights – Everpure 255350 User Manual

Page 2: Shipping weight, Operating weight, Inlet connection, Outlet connection, Service flow rate, Capacity, Working pressure

Advertising
background image

©2006 Pentair Filtration, Inc.

340025 NO06

The MD-CN and MD-CE are Tested and Certified
by NSF International against NSF/ANSI Standard
42 for the reduction of Chlorine, Taste and Odor,
and Particulate Class I. Standard 53 for the
reduction of Asbestos, Cysts, and Turbidity.

Pentair Filtration, Inc.

502 Indiana Avenue - P.O. Box 1047

Sheboygan, Wisconsin 53082-1047

Phone 866.873.7506 Fax 888.203.7361

International Phone 920.457.9435 International Fax 920.457.2417

www.everpure.com

LIMITED WARRANTY OF PHYSICAL QUALITY

If, within eighteen months after manufacture or twelve months after purchase (whichever occurs first),
any part of Pentair Water Treatment/Plymouth Products manufacture which is returned to its factory,
shipping charges prepaid, is found to be defective in material or workmanship in the judgement of
Pentair Water Treatment/Plymouth Products’ engineers, Pentair Water Treatment/Plymouth Products
will repair or replace such part at no charge, f.o.b., Sheboygan factory. Pentair Water Treatment/Plym-

outh Products, however, shall not be liable for damages or delays caused by any defective material or
workmanship, or by failure of any parts due to normal wear and tear. Pentair Water Treatment/Plym-
outh Products will not be responsible for products which malfunction due to user neglect or unauthor-
ized modification.
NOTE: Some states do not allow limitations on how long an implied warranty lasts, so the above limita-
tion may not apply to you. Similarly, some states do not allow the exclusion or limitation of consequen-
tial or incidental damages, so the above limitation or exclusion may not apply to you. This warranty
gives you specific legal rights and you may also have other rights which may vary from state to state.

SPECIFICATIONS

Dimensions

Single

24

1

2

"H* X 3

3

4

"W X 4

1

2

"D

Dual

**

27

1

2

"H* X 19"W X 6"D

Triple

**

27

1

2

"H* X 23"W X 6"D

*Height of the MD-CE and MD-CN are approximately 6" less

“H” dimension includes 2

1

2

" clearance for cartridge changing

Six-Pack Shipping Weights

MD-CN (6 pk) P/N 255348 Replaces P/N EV960123

11 lbs

MD-CE (6 pk) P/N 255350

Replaces P/N EV961210

14 lbs

Shipping Weight

Single Head

3 lbs (1.4 kg)

Dual Head

**

7 lbs (3.2 kg)

Triple Head

**

11 lbs (5 kg)

Operating Weight

Single

CN

6.25 lbs (2.8 kg)

Single

CE

8 lbs (3.6 kg)

Inlet Connection

3

8

" Female Pipe Thread (single)

3

4

" Female Pipe Thread (twin and triple)

Outlet Connection

3

8

" Female Pipe Thread (single)

3

4

" Female Pipe Thread (twin and triple)

Service Flow Rate

MD-CN

Single Head: 0.5 gpm (1.90 L/min)

MD-CE

Single Head: 1.5 gpm (5.67 L/min)

Capacity

MD-CN 1,500 gal (5,670 L)
MD-CE 3,000 gal (11,350 L)

Working Pressure

10-125 psi (0.69-8.6 bar), non-shock

Maximum Temperature

35-100°F (1.7-37.8°C)

** The Dual and Triple Head Assemblies are Not Performance

Tested or Certified by NSF.

Allow 2

1

2

" additional height for cartridge change on all

systems.

DIMENSIONS

16" (CN)

22" (CE)

3

3

4

"

19"

19" (CN)**

25" (CE)**

23"

19" (CN)**

25" (CE)**

Advertising
This manual is related to the following products: