Elta 2308 - Manual (Page 14)

14.
PROGRAM key [Function Explanation]
1. If [PROGRAM] key is pressed during the CD stop mode, the system goes to the program mode. During the
program mode, the track number and PROGRAM display will flash in the 500[ms] interval (Display 1).
2. If [FF/SKIP+] / [FB/SKIP-] key is pressed, the system chooses the track number which it wants to register.
3. If [PROGRAM] key is pressed after choosing a track number, the system keeps the track number, and goes
to next program mode (Display 2).
4. The system can hold 20 programs for CD Mode / 10 programs for MP3. After the system held 20 programs,
it can’t keep another song. During the system holding 20 programs, it can't keep other program. PROGRAM
display and “P 01“ will flash in the 500[ms] interval (Display 3).
5. If [STOP] key is pressed during the program mode, the system removes the contents of the program, and
cancels the program mode.
6. If [PLAY/PAUSE] key is pressed during the system holding the program of more than one, it starts the
program play. During the program play, Display shows PROGRAM is play (display 4).
7. If [FF/SKIP+] / [FB/SKIP-] key is pressed during the program play, the system skips to next / previous
program.
8. If [STOP] key is pressed during the program play, the system stops the program play, and goes the stop
mode. Until [STOP] key is pressed during the stop mode, the system keeps the contents of the program.
MODE key [Function Explanation]
CD Mode:
1. If [MODE] key is pressed, the system changes the mode(as follows intention).
2. During the repeat-1 mode, the system repeats the current track of the CD.
3. During the repeat-all mode, if it reaches the end of the tune of the final track, it is usually returned to the
head track.
PROGRAM
P0 1
PROGRAM
P0 1
PROGRAM
P03
PROGRAM
P03
→ → →
(DISPLAY 1) (DISPLAY 2) (DISPLAY 3) (DISPLAY 4)
023
►
→ → →
023
►
023
►
023
►
REP. REP.
ALL
RANDOM
↓
NO REPEA & RANDOM REPEAT-1 REPEAT ALL RANDOM