Rocktrail Shade Sail Z30718 - Manual (Page 9)

9 GB/MT
Shade Sail
 Introduction
Familiarise yourself with the product prior
to assembly. Carefully read the following
assembly instructions and safety tips.
Only use the product as instructed and only for the
indicated field of application. Keep instructions in a
safe place. Submit all documents to a third party if
distributing the product.
 Proper Use
This product is suitable for providing protection against
the sun in outdoor areas. Any use other than that
described or any modification of the product is not
permissible and may result in injury and / or damage
to the product. The manufacturer is not liable for
damage caused by improper use. The product is
not intended for commercial use.
 Description of parts
and features
1 Sail sun shade
2 Bottom pole section
3 Middle pole section
4 Top pole section
5 Guy line (incl. 2 x spare guy line)
6 Peg (incl. 2 x spare peg)
7 Guy line tensioner
8 Carrying bag
 Technical data
Dimensions: approx. 450 x 440 x 180 cm
(l x w x h)
Weight: approx. 3.2 kg
Safety advice
PLEASE READ THE ASSEMBLY INSTRUCTIONS
BEFORE USING THE PRODUCT! PLEASE KEEP
THE ASSEMBLY INSTRUCTIONS IN A SAFE
PLACE!
 The sail protects you against direct sun impact.
Nevertheless take care about a sufficient sun
protection for your skin.
CAUTION! RISK OF INJURY! Ensure that
all parts are undamaged and have been as-
sembled appropriately. Risk of injury exists if
assembled incorrectly. Damaged parts can
affect safety and function.
CAUTION! Do not leave children unattended.
The product is not a climbing frame or toy. Make
sure that nobody climbs or leans on the product,
particularly children. The product could become
imbalanced and tip up. This may result in injury
and / or damage.
CAUTION! RISK OF INJURY! Never under
any circumstances assemble the product in a
strong wind.
 Select a piece of land that is as flat and firm as
possible to erect your sail sun shade.
 Sandy surfaces reduce the stability of the sail sun
shade. Please ensure that the surface provides
a firm hold for the sail sun shade pegs.
 Never knock the sail sun shade pegs into the
ground with force! If necessary, the guy lines
should only be extended with the help of a
loop and the sail sun shade peg positioned in
a different location.
 The intactness of all connection points and the
guy lines should be checked regularly, as should
the firmness of the sail sun shade pegs in the
ground.

Assembly in the wrong order could damage
the sail sun shade. The manufacturer accepts
no liability of any kind.
CAUTION! DANGER OF POISONING
AND DAMAGE TO PROPERTY! Do not
light any fires underneath the product and keep
it away from sources of heat.