Cleaning, Timer control, Charging a usb device – Tronic TLG 1000 C5 User Manual

Page 35: Cleaning the housing

Advertising
background image

32

TLG 1000 C5

GB

Timer control

In addition, this battery charger has a timer control which automatically switches
over to retention charging after 17 hours. This serves as an additional protection
against overcharging should the charge termination not respond due to a possibly
defective battery.

Charging a USB device

IMPORTANT

Ensure that the power consumption of the USB device is not higher than
1000 mA. For more information, refer to the instruction manual of your
USB device.

Insert the USB connector of the USB device into the USB output

5

of the

battery charger.

If necessary, switch the USB device on.

NOTICE

You can simultaneously charge batteries in the battery charger and a USB
device at the USB output

5

. Be aware that the charging current for the batter-

ies is thereby halved and the charging process thus takes somewhat longer.

Cleaning

DANGER

Always remove the plug before cleaning the device. There is the risk of an
electric shock!.

When you are cleaning the device ensure that no moisture gets inside it, so
as to avoid irreparable damage to it.

IMPORTANT

Do not use aggressive or abrasive cleaning agents, as these can damage
the upper surfaces.

Cleaning the housing

Clean the surfaces of the device with a soft, dry cloth. For stubborn soiling
use a lightly moistened cloth.

Never clean the insides of the charging slots with moist cloths. Instead, use
a clean soft brush to clean them.

If soiled, clean the charging contacts with a dry cloth.

IB_100039_TLG1000C5_LB2.indb 32

IB_100039_TLG1000C5_LB2.indb 32

25.06.14 11:22

25.06.14 11:22

Advertising
This manual is related to the following products: