Equator CL 837 V - Manual (Page 5)

WALL INSERT OR RECESSED INSTALLATION
CONTROL PANEL FEATURES
7.1 Warning! To reduce the risk of fire, this appliance must
be exhausted outdoors.
7.2 Minimum clearances between the dryer cabinet and
adjacent walls or other surfaces are:
Sides 0" (0 cm)
Front & Rear 3" (7.6 cm)
7.3 Make sure that the air inlets at the back are not blocked
and do not allow fluff/lint to accumulate around the dryer
B
A
A. START BUTTON
To start the drying cycle
B. DRY
PROGRAMS: Choose the final dryness of the
load by selecting the desired
program (see program chart)
Note:
The use of a ready-to-iron program will use
30% less energy than a ready-to-wear
program.
PROGRAM CHART
4