Tronic TLG 1000 C4 - Manual (Page 33)

30 TLG 1000 C4
GB
MT
Handling and operation
In this chapter you will receive important information for the handling and opera-
tion of the device.
Charging batteries
♦ Place the device on a smooth, level and slip resistant surface.
♦ Compare the technical details with those of your power supplier. If they
match, insert the plug into a mains power socket. The LEDs light up in red
three times. The battery charger is now ready for use.
♦ Insert the batteries into the charging slots. Press the 9 V Block batteries
into the charging slot until they audibly engage.
NOTICE
► 1 to 8 batteries can be individually charged:
- 4 x Type C or Type D batteries in the charging slots 1 to 4, with additionally
2 x Type 9 Volt Block batteries in the charging slots 5 and 6
or
- 6 x Type AA or AAA in the charging slots 1 to 4 and additionally
2 x Type 9 Volt Block batteries in the charging slots 5 and 6.
♦ The charging process now begins. The battery charger has an LED for each
compartment in the charging slot. The LEDs of the respective charging slots
show the charge status of the individual batteries. In addition, the charge
status is also indicated on the display.
NOTICE
► If the LED on the charging slot blinks red for longer than 5 seconds and
the complete battery symbol in the display
4 fl ashes, the battery is either
improperly inserted into the loading slot or it is defective.
IB_87964_TLG1000C4_LB5.indb 30 IB_87964_TLG1000C4_LB5.indb 30 27.02.13 11:12 27.02.13 11:12