Common features description, P/2 da4xi and p/2 da6xi – Extron electronic P/2 DA Series User Manual

Page 2

Advertising
background image

coMMon featUres

description

PC

Extron

P/2 DA4xi

VGA Distribution

Amplifier

Displays

Projector

Extron

SI 26

Surface-

mount

Speakers

Extron

SI 26

Surface-

mount

Speakers

Extron

HPA 502

Audio Power

Amplifier

Extron

HPA 502

Audio Power

Amplifier

Extron

P/2 DA8 A

VGA Distribution

Amplifier with Audio

PC

Local

Monitor

Audio In

Video In

Projector

Flat Panel

Display

The Extron P/2 DA Series are VGA distribution amplifi ers with four, six, eight,
or twelve outputs. Each unit accepts a single VGA input signal and actively
splits it for distribution to multiple outputs. Offering 350 MHz (-3dB) of RGB
video bandwidth, the P/2 DA Series is compatible with VGA-QXGA graphic
cards, projectors and fl at panel displays. Outputs are individually buffered
and amplifi ed to help maintain the original signal integrity and eliminate
noise interference. ID bits are routed to output one for local monitor support.
The P/2 DA Series is ideal for use in applications where one computer-video
signal needs to be routed to multiple displays, such as rental and staging,
courtrooms, conference rooms, and training facilities.

The P/2 DA4xi and P/2 DA6xi include a video gain switch which provides a
signal boost to help maintain video signals integrity over long cable runs.

The P/2 DA8 and P/2 DA12 offer selectable input and output sync
impedance. This provides better compatibility with a wide range of laptop
types. These models also feature individual output muting via contact closure.
This feature allows the user to mute any one or all outputs with simple
pushbutton relay control, and eliminates the cost of an extra control system
serial port.

The P/2 DA8 A and P/2 DA12 A have all the features of the P/2 DA8 and
P/2 DA12 and add eight-output and twelve-output stereo distribution
amplifi ers, respectively. Both feature active PC audio buffering which converts
unbalanced PC audio to balanced, line level signals, eliminating noise over
long cable runs. Unbalanced stereo audio is input on 3.5 mm stereo mini
jacks, while balanced or unbalanced stereo audio is output on captive screw
connectors. Using pre-terminated cable assemblies, such as Extron’s VGA with
Audio Cables, eliminates crimping and makes installations faster and easier.

All P/2 DA Series models are housed in 1U high, rack-mountable enclosures.
The P/2 DA4xi and P/2 DA6xi utilize a one-half rack width enclosure, while
the P/2 DA8 and P/2 DA12 utilize a full rack width enclosure. All models
are equipped with an internal, universal power supply for worldwide power
compatibility.

n

350 MHz (-3dB) RGB video bandwidth, fully loaded

n

Compatible with VGA-QXGA resolutions

n

DDC signals and ID bits routed to local monitor output

n

Internal universal power supply

p/2 da4xi and p/2 da6xi

n

Video gain switch – Provides signal boost to maintain video signal

integrity over long cable runs.

p/2 da8 and p/2 da12

n

Individual output muting via contact closure – Mute any one or all

outputs with simple pushbutton or relay control.

n

Selectable input and output sync impedance – Sync impedance

can be set for optimum compatibility with a wide range of laptop
computers.

p/2 da8 a and p/2 da12 a

n

Active PC audio buffering – Converts unbalanced PC audio to a

balanced, line level signal, eliminating noise over long cable runs.

n

Individual output muting via contact closure – Mute any one or all

audio outputs with simple pushbutton or relay control.

n

Selectable input and output sync impedance – Sync impedance

can be set for optimum compatibility with a wide range of laptop
computers.

Advertising
This manual is related to the following products: