Eclipse - Fujitsu Ten TomTom - Manual (Page 17)

Using the car stereo 7.
17
Using the car stereo
The car stereo uses the TomTom navigation device to display information,
play videos, and show controls.
Through your TomTom navigation device, you can control the following:
• The radio
• The audio CD/CD-ROM/DVD player
• An iPod
• Music stored on a USB stick
For full details, see the owner’s manual included with the car stereo.
Switching to audio
To use your TomTom navigation device to control your car stereo, press and
immediately release the Screen button on the car stereo. You can switch back
to the navigation functions at any time by pressing the Screen button again.
To switch to other audio input sources, press the Source button on the car
stereo.
The volume of music and the radio is set by the volume control on the car
stereo. You can adjust the volume of spoken instructions and hands-free calls
separately by changing the volume on your TomTom navigation device.
Using the radio
Your TomTom navigation device shows the radio station that you are tuned to
and the frequency.
You can save a station to a preset station. There are 6 presets per radio band.
To save a frequency, press and hold the number that you want to use to save
the frequency. When the color of the button changes, the frequency is saved.
Using an iPod® and USB storage devices
You can use your TomTom navigation device to play songs and videos saved
on an iPod® and songs stored on a USB storage device. The cable for
connecting an iPod to your car stereo is available as an accessory.
Note: Your TomTom must be docked in the car stereo to play back music or
videos stored on an iPod® or USB storage device