Ultimate Speed PAWSB 12 A1 - Manual (Page 11)

GB
9 PAWSB 12 A1
Introduction
Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a quality product.
These operating instructions are a part of this product.
They contain important information in regard to safety,
use and disposal. Before using the product, familiarise
yourself with all of these operating and safety instruc-
tions. Use the product only as described and only for the
specifi ed areas of application. In addition, pass these
documents on, together with the product, to any future
owner.
Intended Use
The appliance is intended for checking the charge of
a 12 volt battery. In addition, the charging function
of a generator can also be tested. The appliance is
not meant for commercial use.
Package contents
Battery & Alternator Tester PAWSB 12 A1
2 quick-connect terminal clamps, permanently mounted
(1 red, 1 black)
Operating instructions
Safety instructions
Danger! Avoid danger to life and
limbs caused by improper use!
● Do not operate the appliance with a damaged cable.
● The measurement cable must be placed so that
they cannot be caught by rotating parts within the
engine compartment.
CAUTION! Damaged measurement cables
create a life-threatening risk of electric shock.
●
Dispose of the device when the measurement cables
have become damaged. The measurement cables
are not intended to be repaired.
Danger of explosion and fi re! Make
certain that explosive or combustible substances,
such as petrol or solvent, cannot be ignited during
use of the appliance!
Ignition sources (e.g. open light, burning cigars,
cigarettes or electric sparks) must be kept away
from the starter batteries.
IB_78533_PAWSB12A1_LB1.indd 9 IB_78533_PAWSB12A1_LB1.indd 9 08.10.12 12:14 08.10.12 12:14