Ultimate Speed UASB 12 A1 - Manual (Page 9)

6 UASB 12 A1
GB
■
During operation, always ensure that the 12 V connector
is fi rmly plugged into the 12 V connection and the socket
is free of soiling. If there is insuffi cient contact between the
connector and the socket, vehicle vibration may cause the
power supply to switch on and off at short intervals. This can
result in overheating.
■
Please ensure that you:
- only connect the seat cushion to the voltage specifi ed in the
technical information,
- do not switch the seat cushion on when it is folded or crum-
pled up,
- do not kink the seat cushion sharply,
- do not place any objects such as cases or washing baskets
on the seat cushion whilst it is switched on. Otherwise the
seat cushion could become damaged.
IB_100113_UASB12A1_LB4.indb 6 20.05.14 17:27