Electrolux EWG 14740 W - Manual (Page 12)

12 electrolux use
To empty out the water:
● turn the programme selector dial to
«O»
● select the Drain or Spin
programme
● reduce the spin speed if needed, by
means of the relevant button
● depress «Start/Pause» button
● at the end of the programme, the
display shows a
0.00 flashing.
The (Door locked) icon desappears
and the door can be opened.
Night Cycle : by selecting this
option, the machine will not drain the
water of the last rinse, so as not to
wrinkle the laundry.
As all spinning phases are suppressed,
this washing cycle is very noiseless and
it can be selectionned at night or in
times with a more economical power
rate.
In some programmes the rinses will be
performed with more water.
When the programme has finished, the
display shows a
0.00 flashing, the
(Door locked) icon is still visualized, the
«Start/Pause» light is off and the door
is locked to indicate that the water
must be emptied out.
To empty out the water, please
read the previous option steps.
Select the Easy Iron option
Selecting this button the laundry is
gently washed and spun to avoid any
creasing. In this way ironing is easier.
Furthermore the machine will perform
some additional rinses for cotton and
synthetics.
This function can be used for cotton
and synthetic fabrics.
Select the Extra Rinse option
The machine performs some additional
rinses.
This option is recommended for people
who are allergic to detergents, and in
areas where the water is very soft.
Select the Delay start
Before you start the programme, if
you wish to delay the start, press the
«Delay» button repeatedly, to select the
desired delay.
The corresponding icon will appear
on the display in the upper part of the
display.
The selected delay time value (up to 20
hours) will appear on the display for
about 3 seconds, then the duration of
the programme will appear again.
Temp. Spin Easy Iron Extra rinse Delay
Temp. Spin Easy Iron Extra rinse Delay
Temp. Spin Easy Iron Extra rinse Delay
132973570 EN.qxd 23/05/2007 17.18 Pagina 12