Ultimate Speed UKL 12 A1 User Manual
Page 11
Advertising
GB
8
UKL 12 A1
♦
Switch the device on by sliding the On/Off switch 4
to the "ON" position. The indicator lamp 2 illumi-
nates and signals that the vehicle air cleaner is
operating. Depending on the vehicle type it is pos-
sible that the ignition has to be switched on fi rst.
♦
To switch the device off , set the On/Off switch 4
to the "OFF" position. The indicator lamp 2 goes
out.
CAUTION
►
The device also consumes power in standby
mode and therefore must be disconnected from
the on-board power supply after use! Otherwise
the battery will discharge when the engine is
not running.
IB_31369_UKL12A1_LB4.indb 8
IB_31369_UKL12A1_LB4.indb 8
03.04.14 08:10
03.04.14 08:10
Advertising