United Office ULGD 350 A1 - Manual (Page 10)

7 ULGD 350 A1
GB
Appliance description
Pouch ejector slot
2 Indicator light Ready (ready for use)
3 Indicator light Power (appliance switched on)
4 Anti-Blocking switch and pouch thickness switch
5 On/Off switch with selector switch for hot and cold lamination (Hot/Off /Cold)
6 Pouch slot for manual pouch insertion
Document
support
Handling and operation
In this chapter you will receive important information about the handling and
operation of the appliance.
Suitable laminating pouches
For hot lamination you can use pouches with a width of up to 230 mm and a
maximum thickness of 125 micron. For cold lamination you can use pouches with
a maximum thickness of 200 microns. Please note that each laminating pouch
may only be used once.
NOTICE
► For hot lamination, use only laminating pouches that are expressly
intended for hot lamination.
► For cold lamination, use only laminating pouches that are expressly
intended for cold lamination.
► Take note that the laminating pouches supplied with the laminator are
intended exclusively for hot lamination.
Switching levels
Selector switch
position
5
Pouch thickness
switch position 4
Laminating pouch
thickness
Hot 80 > 60 - 80
Hot 125 85 - 125
Cold 125 to 200
NOTICE
► For high-gloss photos, you should select the switch position “125” as well
as the appropriate pouch thickness.
IB_100158_ULGD350A1_LB4.indb 7 02.07.14 13:42