United Office Z11063 - Manual (Page 4)

4 GB
Introduction / Safety advice / Assembly
Q
Technical data
Material: MDF board, metal frame
Dimensions: approx. 96 x 79 x 54 cm (W x H x D)
Weight: approx. 19 kg
Max. load: 80 kg
Safety advice
Keep all the safety advIce and Instruc-
tIons In a safe place for future
reference!
J WarnIng! rISk of loSS
of lIfe or aCCIDenT To
InfanTS anD ChIlDren!
Never leave children unsupervised with the
packaging materials. Danger of suffocation.
This product is not a toy.
WarnIng! Danger To lIfe! Keep
children away from the working area during
assembly. The contents of this package include
many small screws and other small parts. These
small parts could be inhaled or swallowed and
cause a danger to life.
CaUTIon! Danger of InJUrY! Ensure
that all parts are undamaged and have been
assembled appropriately. Risk of injury exists if
assembled incorrectly. Damaged parts can
effect safety and function.
J CaUTIon! Do not allow children to use the
product unsupervised! The product is not a
climbing frame or a toy! Make sure that nobody,
especially a child, climbs on or leans against
the product. The product could become unsta-
ble and roll away and/or tip over, resulting in
injury or damage.
J Make sure that the product is only assembled
by competent persons.
J CaUTIon! Never attempt to lift or move
this product when it has any kind of weight
upon it.
J Distribute weight upon this products‘ surface
evenly so that it cannot overturn.
J Make sure the product is stable before use!
J
80 kg
The load on the product must not
exceed 80 kg. Failure to observe
this advice risks injury and/or
damage to the product.
J Always apply the brake firmly as soon as you
have placed the product in its chosen location.
This is done to prevent the product from unin-
tentionally rolling away and causing injury
and/or damage to the product.
J Keep the product away from sources of water
or moisture. Failure to observe this advice may
result in damage to the product.
J
Never place your feet on the lower shelf 4 .
The lower shelf 4 is not designed for that type
of loading. Failure to observe this advice may
result in damage to the product.
J
Make sure that this product is standing on a
solid level sunface and transport the product
on even ground.
Q
assembly
note: Assemble the product on an adequately
large, scratch-proof surface. If necessary place a
cover down first to prevent the product or the
surface from being scratched.
j Assemble the product in accordance with
Figs. A – H.
note: You can position the side shelf
6 and
the keyboard tray with mouse tray 8 to the
right or left, as you like (see Fig. H).
note: Always apply the brake firmly to the
castor
9 as soon as you have placed the
product in its chosen location. Press the lever
on the castor
9 in the direction to apply the
brake. Pull the lever on the castor 9 in the
direction to release the brake.
note: Retighten all threaded connections regularly.