Management – EnGenius Technologies ECB-1220R User Manual
Page 16
ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater
Version 1.1
16
o
Mode: Wireless configuration mode such as Client Bridge, AP, or WDS.
o
Band: Frequency and IEEE 802.11 operation mode (b-only, g-only, or b+g).
o
SSID: The name used to identify the wireless network.
o
Channel Number: The channel used to communicate on the wireless
network.
o
Encryption: The type of security used on this network. It may be disabled,
WEP, WPA, etc.
o
BSSID: The MAC address of the SSID.
o
State: The current state of the bridge. It may be scanning or associated or
disabled.
o
Signal Strength: The signal strength of the wireless device.
o
Noise Level: The level of interference.
TCP/IP Configuration:
o
Attain IP Protocol: The IP address setting may be fixed or static.
o
IP Address: Displays the current IP address of the LAN port.
o
Subnet Mask: Displays the current subnet mask for the IP address.
o
Default Gateway: Displays the default gateway for the device.
o
DHCP: Displays the DHCP setting.
o
MAC Address: Displays the MAC address of the device.
Management
Click on the Management link on the navigation
drop-down menu. You will then see five options:
operation mode, status, statistics, log, upgrade
firmware, save/reload settings, and password.
Each option is described below.